Lithium Titanate Battery–Energy Storage Combined Frequency Regulation: High-Frequency Reciprocal Charging and Discharging to Enhance Frequency Regulation Revenue

2026/10/30

Fire Storage AGC Frequency modulation operates under high‑frequency, short‑pulse conditions with tens of thousands of repeated charge–discharge cycles, imposing extremely stringent requirements on rate capability, cycle life, and safety.

       🔋 Lithium iron phosphate batteries typically have a cycle life of 3,000–6,000 cycles; they are prone to capacity fade under long-term high-frequency pulse conditions and carry the risk of lithium plating and gas generation, making them unsuitable for frequency‑regulation applications requiring tens of thousands of cycles.

       🔋 Lithium Titanate Batteries: Featuring a zero‑strain lithium titanate anode, these batteries boast chemically stable materials that mitigate thermal runaway risks at the source, reinforcing operational safety. They withstand tens of thousands of charge–discharge cycles, deliver robust fast‑charging performance, exhibit excellent low‑temperature capabilities, and resist lithium plating. Their cycle life far exceeds that of conventional lithium batteries, making them ideally suited to meet the high‑frequency, high‑rate charging and discharging demands of frequency regulation applications, thereby extending equipment service life and enhancing O&M efficiency. With ultra‑fast response times, they can track grid frequency fluctuations within milliseconds, addressing the lag inherent in traditional thermal power units. By enabling coordinated operation between thermal generation and energy storage, they significantly enhance overall system performance. Grid frequency regulation Efficiency.

 

Real-world case validation— Zhengzhou Yune Thermal Power–Energy Storage Combined Frequency Regulation Project

       The installed capacity comprises two 660 MW ultra-supercritical coal-fired units. In this joint frequency regulation project involving thermal and energy storage, the energy storage system employs… Lithium Titanate Energy Storage Technology The project has a total capacity of 20 MW/6.68 MWh, covers an area of approximately 2,010 square meters, and comprises four 5 MW/1.67 MWh lithium titanate battery modules, four 5 MW integrated converter‑step‑up units, along with associated electrical equipment.

Characteristics of lithium titanate batteries:

       1️⃣ The volume change of the charge–discharge unit cell is less than 0.3%, resulting in virtually no lattice expansion or contraction; cycling typically reaches 10,000–30,000 cycles at 80% capacity, far exceeding that of graphite-based systems (2,000–3,000 cycles), with a designed service life of 20–30 years (zero strain and exceptionally long cycle life).

       2️⃣ The lithium‑intercalation potential of the negative electrode is approximately 1.55 V vs. Li/Li⁺, significantly higher than the deposition potential of metallic lithium, making it inherently less prone to lithium dendrite formation; under normal conditions, a thick SEI layer is unlikely to form; in most cases, puncture, compression, and short circuits do not result in ignition or explosion; the thermal runaway onset temperature is high (around 270°C), reflecting the cell’s intrinsic safety.

       3️⃣ A remarkable “self‑fusing” protection mechanism, with a built-in “fuse” function (interrupting short circuits to safeguard system integrity);

       4️⃣ It does not rely on SEI‑film‑mediated charge–discharge, eliminating the risk of high‑temperature decomposition and enabling operation at elevated temperatures—provided that the thermal stability of the separator and plastic components permits.

       5️⃣ It can be discharged down to 0 V and still charge and discharge normally, requiring no maintenance.

       6️⃣ Ultra-fast charge–discharge capability with symmetrical performance! 10C–50C, comparable to supercapacitors;

       7️⃣ High energy conversion efficiency: at 0.5C and 100% depth of discharge, the energy conversion efficiency can reach 98.2%; at 4C and 100% DOD, it can reach 92%.

       8️⃣ Ultra-wide operating temperature range: Standard models can operate across a broad temperature span of –40°C to 60°C, and can be started directly in extremely cold environments without the need for a complex preheating system.

       9️⃣ Minimal self-discharge; shallow charging and discharging over many cycles do not harm the battery, making it ideal for applications involving frequent start‑stop operations and backup power.

 


       

      Shanneng Technology was founded in July 2021. The company focuses on the research, development, manufacturing, and sales of specialized battery materials characterized by “high safety, fast charging, long cycle life, and a wide operating temperature range,” with its core expertise centered on lithium titanate (LTO) and related technologies.

 

Main Products and Their Features

 

LTO Competitor Performance Comparison

 

Return to